There are 9 parts with editable properties, all of which can be found in the Powered category - DC motors, Servo Motors, Powered Claw, Powered Pincer, Small Piston, Large Piston, Laser Pointer, Powered LED, and Vacuum.


DC Motor[edit | edit source]


Name Description
Name field Allows you to give each part its own label
Rotational Direction Allows you to choose in which direction the motor rotates by pressing the FLIP button.
MAX RPM Slider Changes the motor’s rotation speed, ranging from 0 to 500.
Start On Sets the part to start “ON” or “OFF”
Max Torque Determines the strength of your motor, can be adjusted from 0 to 5000.
Acceleration Time slider Allows you to build in an acceleration delay.
Max Brake Force Determines the max force a motor will apply while braking.
Braking time Determines how long the part takes to reach Max Brake Force.


Servo Motor[edit | edit source]

Properties - Servo Motor Properties.png

Name Description
Name field Allows you to give each part its own label
Rotational Direction Allows you to choose in which direction the motor rotates by pressing the FLIP button.
MAX RPM Slider Changes the motor’s rotation speed, ranging from 0 to 500.
Angle Limits Allows you to adjust its angle limits from 0 to 180 degrees for both the clockwise and counterclockwise side. These angles can also be flipped using the FLIP button.
Start On Sets the part to start “ON” or “OFF”
Max Torque Determines the strength of your motor, can be adjusted from 0 to 5000.
Acceleration Time slider Allows you to build in an acceleration delay.
Max Brake Force Determines the max force a motor will apply while braking.
Braking time Determines how long the part takes to reach Max Brake Force.
Return to Origin Returns the motor to its original angle.
Oscillate Makes the motor repeat its rotational movement.
Map to Angle Allows input to be mapped from min to max angles.


Small Piston[edit | edit source]

Name Description
Name field Allows you to give each part its own label
Max Velocity Adjusts velocity from 0 to 100
Max Force Adjusts force from 0 to 5000
Start On Sets the part to start “ON” or “OFF”
Acceleration Time slider Allows you to build in an acceleration delay.
Return to Origin Returns the motor to its original angle.
Oscillate Makes the piston repeat its movement.


Large Piston[edit | edit source]

Name Description
Name field Allows you to give each part its own label
Max Velocity Adjusts velocity from 0 to 100
Max Force Adjusts force from 0 to 50000
Start On Sets the part to start “ON” or “OFF”
Acceleration Time slider Allows you to build in an acceleration delay.
Return to Origin Returns the motor to its original angle.
Oscillate Makes the piston repeat its movement.


Powered Claw[edit | edit source]

Name Description
Name field Allows you to give each part its own label
Max Force Adjusts force from 0 to 10000
Start Closed Sets the claw to start in Open or Closed position


Powered Pincer[edit | edit source]

Name Description
Name field Allows you to give each part its own label
Max Force Adjusts force from 0 to 10000
Start Closed Sets the pincer to start in Open or Closed position


Vacuum[edit | edit source]

Name Description
Name field Allows you to give each part its own label
Power Adjusts suction from 0 to 10
Start On Sets the part to start “ON” or “OFF”


Powered LED[edit | edit source]

Name Description
Start On Sets the part to start “ON” or “OFF”
Pulse Sets the LED to either pulse or provide constant light
Pulse Time Adjusts the rate of pulsing on the Powered LED


Laser Pointer[edit | edit source]

Name Description
Start On Sets the part to start “ON” or “OFF”


Community content is available under CC-BY-SA unless otherwise noted.